Home / Products / Site Signs
Metal Signs
Site Signs
ACM site boards with eyelets or drilled fixing holes
Site Signs
About this site signs
Larger format boards for site entries, hoarding gates and yard identification, panelled up in ACM so they survive being moved between sites. Eyeletted for temporary fencing or drilled for a permanent fixing, your call.
Materials compared
What each option is actually good for, so you can pick on the job rather than on the price alone.
| Material | Thickness | Indoor / outdoor | Expected outdoor life | Best for |
|---|---|---|---|---|
| ACM, aluminium composite | 3mm | Both | 7 to 10 years | Fascias, site boards, safety and building signs |
| ACM, heavy duty | 5mm | Outdoor | 7 to 10 years | Large unsupported panels and gantry signs |
| Aluminium sheet | 1.6 and 2mm | Outdoor | 10 years or more | Signs that take knocks or need bending |
| ACM with cast vinyl overlay | 3mm | Outdoor | 5 to 7 years | Colour-critical brand work and part-changes |
| Reflective-faced ACM | 3mm | Outdoor | 5 to 7 years | Car parks, plant yards, night visibility |
Questions we get asked
ACM or solid aluminium?
ACM for almost everything: lighter, flatter, cheaper and it prints beautifully. Solid aluminium only where the sign will be hit, bent to a curve, or fixed somewhere a plastic core would be a problem, because it costs more and is heavier to freight.
How do you fix it to a wall?
Corner-drilled holes with masonry screws and cup washers is the standard. Ask for oversized holes on a long panel: metal expands in the sun and a tightly bolted sign will bow. For a clean face, panels can be tape-mounted to a smooth surface or fixed to a subframe.
Can you make safety signs in the standard layout?
Yes. Send the wording and we will set it in the conventional safety format, with the pictogram, the signal word and the message panel in the expected colours. If the sign has to comply with a specific standard on your site, name it and we will match the layout to it.
Do the corners have to be square?
No, and usually they should not be. Radiused corners are safer to handle, less likely to catch the wind and lift, and they look more finished. We can also route the panel to a full custom outline if the shape matters.
Can it be printed on both sides?
For a hanging or projecting sign it should be. Note that ACM has a face and a back, and only the face is finished for print, so a genuinely double-sided metal sign is usually two panels bonded back to back. We will quote it that way.